8:00 to do this! Pool construction is no longer a problem of corrosion, corrosion pool is to use a variety of effective means£¬
To protect the pond surface from corrosion, so the pool play its due role. But no matter what kind of anti-corrosion technology has its own blind spots, this blind spot is likely to cause the entire project failure. Cesspool anti-corrosion technology, too, what specific way to solve this problem, this is a problem in every skill considered. Pool preservative commonly used physical corrosion, chemical corrosion, electrochemical corrosion and other methods. How blind spot these methods to solve it?1. Brush Primer: to be surface-treated acceptance should be brushing primer within eight hours, to prevent re-contamination of the dead at the site of irregularities with a brush, brush tightly.
2. After the primer surface preparation is completed checked by the painting construction as soon as possible.
3. Construction Technology Requirements: requires surface coating, brushing uniform, free flowing, sagging, holidays and other phenomena exist, the overall look smooth and beautiful.
4. Before painting, should be free of dust, oil, surface dust and other surface treatment. Particular attention to the cross and the female angle. Should be consistent with the glass up brush steel supporting primer layer, layer thickness and brushing should meet the design requirements, uniform brushing surface coating after drying and curing.
5. Brush finish: FRP lining affixed after passing inspection before proceeding to the next step of construction, until it reaches the thickness of the design requirements.
6. spread a brush oil should suffer a brush and brush the top with oil paints and down gently straighten out, go brush to achieve a smooth, forced to be uniform, level should shun the light irradiation direction brushing. To avoid seams, each segment should be connected to each other in brushing often move the location, do not always engaged in one location.
7. When brushing, the first of corners, edges and corners, cracks at the precoating, if necessary, use a brush pole were dispensed to ensure seamless coating film of uniform thickness.
8. multilayer lining paste, paste must dry before lining the upper lower fiberglass, it should be combined with an interlayer close, no stratification.
- Previous£ºDESCRIPTION OF VEGF glass flak 2016/8/27
- Next£ºStudy on heavy duty coating sy 2016/3/28
More