¡¡DESCRIPTION OF VEGF glass flake mortar performance, VEGF glass flake mortar is a high solids content of heavy anti-corrosion and anti-corrosion coatings overweight£¬
Often with high adhesion and elongation of vinyl resin, glass flake, and other materials processing, it can be used for a number of heavy anti-corrosion high temperature requirement, such as high temperature chimney, desulfurization devices. Currently, Japan, the United States and other countries are using this material.¡¡Workshop floor and equipment based on the use of anti-corrosion resin mortar floor structure (total thickness of about 7 ~ 10mm), the structure: Primer 1 ~ 2 + fiberglass (2 cloth 3 oil) isolation layer + resin mortar layer (5 ~ 7mm) + surface layer (approximately 1mm). VEGF glass flake mortar ultra-low permeability, high bond strength, adhesion and impact strength, good temperature performance is poor, easy construction, excellent corrosion resistance and heat resistance. VEGF clay test run on many domestic FGD equipment, and test results show that in foreign countries, its performance with the current imports of similar products fairly, can replace imported products used in the FGD plant each device or other device.
¡¡Floor and equipment-based anti-corrosion epoxy resin, vinyl resin now, but in the primer of choice, many construction unit also used to make epoxy primer material in order to increase the adhesive properties of the resin and the grassroots, but generally be applied epoxy amine curing agent, curing the surface of the oily substance surfaced again and can not be a good match vinyl resin bonding and, after curing surface treatment are allowed for subsequent anti corrosion structure construction, if not easy delamination, cracking.
- Previous£ºEasy to clean glass flake more 2016/8/29
- Next£ºStudy on heavy duty coating sy 2016/3/28
More