News

Your current location:Home - > News

Role tank in compressed air systems are: a buffer, so that a more stable supply, reduce air compressor start frequently. While allowing the compressed air tank precipitation in addition to the more favorable water decontamination

Selection of the basic requirements of the air compressor tank as follows:

  1, the size of the tank volume should be at 10% displacement of the compressor - 20%, we generally choose 15%, while gas consumption is large, the volume of the tank should be appropriately increased, if when the site gas consumption is small, it can be less than 15%, preferably not less than 10%.

  2, capacity dryer and filter should be consistent with the displacement of the compressor.

  3, the dryer should be installed before the filter automatic drainage.

  4, the use of adsorption dryers, compressors should be reserved for the corresponding gas consumption.

  5, installed after the dryer cylinders, cylinders embodied the role more fully, play a buffer role in cooling and sewage, reduce the load of the dryer system for gas more uniform working conditions. Dryer installed before the gas tank, the system can provide a greater ability to regulate the peak, more for gas volatile conditions.

Air compressor tank purchase Notes

First select large enterprises, well-known brand products. The company's products not only strictly enforce the GB150-98 "steel pressure vessel" standards, but also to form their own corporate standards, and these enterprises advanced production equipment, production process, strict management, good quality and use of raw materials. While these companies may be relatively expensive prices, but to ensure that the use of the product, using them at ease. In addition, through a variety of quality system certification of products it produces are also preferred.

  Second, look at the appearance. The appearance of a product reflects its quality and value, only the formal strength of the manufacturers and have advanced equipment to ensure good quality assurance system to ensure product quality appearance. A good quality gas tank trademark is very evident in the 50 meters away from the gas tank of the gas tank can clearly know the brand. Approached the tank, the tank itself, bright color, uniform surface treatment, welds smooth, clear lines, so it is best to buy new products.

  Third, look at the product nameplate. On the nameplate should indicate the name and date of manufacture of production enterprises, supervisory inspection units, in the upper right corner of the nameplate whether the supervisory inspection agency seal, and, on the nameplate must indicate the product number, weight, volume size, the bear pressure working pressure and maximum pressure and water pressure testing, but also need to indicate the gas tank of media, just below the nameplate entire tank must have a stamp product number, and the number symbol and number on the nameplate must be the same, if find two numbers are inconsistent, please do not buy the best.

  Fourth, look at the quality assurance. In accordance with relevant state regulations, each gas tank must be equipped with a factory quality guarantee a quality assurance is to prove that the gas tank qualified important documents, if there is no quality assurance, even if prices were low gas tank, but to ensure safe to use, ask the user is best not to buy.

  Fifth, look at qualified manufacturing enterprises. A powerful brand-name companies, owned Certificates is not an ordinary business can be compared. Although there are some small business pressure vessel manufacturing license, but overall obsolete equipment, management is not very standard, produced by the cylinders easy security risks, so the average user to buy, preferably more comprehensive understanding of the qualification of all aspects of business, in order to avoid unnecessary trouble.